| 
 | 
 |   |   | 


PRODUCTS > STANDARD SIZES AND TOLERANCES


  Diameter Tolerance Lengths
Standard extruded rod diameters:
0.250" to 0.625" 1/16" increments
0.625" to 3.000" 1/8" increments
3.000" to 5.000" 1/4" increments
5.000" to 10.000" 1/2" increments
10.000" to 12.000" 1" increments
0.250" to 1.000" +.003"/-.000" 8ft., 10ft.
1.125" to 1.750" +.005"/-.000" 8ft., 10ft.
1.875" to 2.000" +.010"/-.000" 8ft., 10ft.
2.125" to 2.500" +.015"/-.000" 8ft., 10ft.
2.625" to 2.875" +.060"/-.000" 8ft., 10ft.
3.000" to 4.000" oversize to finish 8ft., 10ft.
4.250 to 12.000" oversize to finish 4ft., 8ft.
Notes:
  • All extruded rod lengths are supplied oversize.
  • Maximum length for annealed rods is 12 ft.
  • Rods up to 3.000" can be ground to any intermediate diameter.
  • Please call for price & delivery.
  • Intermediate and over-length extruded rod lengths quoted upon request.
  • Minimum quantities may apply.
     
     

 

 

 

  Thickness Tolerance Widths Lengths
Standard extruded plate thicknesses:
0.250" to 0.375" 1/16" increments
0.375" to 1.000" 1/8" increments
1.000" to 3.000" 1/4" increments
3.000" to 5.000" 1/2" increments
 
0.031" +.003"/-.003" 24" 48"
0.062",.093" +.005"/-.005" 24" 48"
0.125" +.010"/-.010" 24" 48"
0.187" +.025"/-.025" 12", 24" 12", 24", 48"
0.250" to 1.00" +.025"/-.000" 12", 24" 12", 24", 48"
1.250" to 2.000" +.060"/-.000" 12", 24" 12", 24", 48"
  2.250" to 5.000" oversize to finish 12", 24" 12", 24", 48"
Notes:
  • Width/Length Tolerance: +.250"/-.000" 0.250" to 1.000" thick
  • Natural and Black Acetal, Delrin and Nylon 6/6 plates are also stocked 24"x96". 0.375" to 1.5" thick
  • Natural and Black Acetal plates are also stocked 48"x96".
  • Plate 0.375" and thicker and up to 24" wide can be planed to intermediate thicknesses.
  • Please call for price & delivery.
  • Non-standard plate sizes quoted upon request.
  • Minimum order quantities may apply.
  • Custom planning is available for an additional charge.
     
     

 

 

 

  Diameter Tolerance Lengths
Standard cast nylon rod diameters:
2.000" to 5.000" 1/4" increments
5.000" to 9.000" 1/2" increments
9.000" to 13.000" 1" increments
2.000" to 3.000" oversize to finish 10ft.
3.250" to 9.000" oversize to finish 4ft.
10.000" to 13.000" oversize to finish 2ft.
     
Notes:
  • All rod lengths are supplied oversize.
  • Larger diameters are available on a custom basis.
  • Minimum order quantities may apply.
     

 

 

 

  Thickness Tolerance Widths/Lengths
Standard cast nylon plate thicknesses:
0.250" to 1.000" 1/8" increments
1.000" to 4.000" 1/4" increments
0.250" to 4.000" oversize to finish 24" / 48"
0.375" to 1.500" oversize to finish 48" / 96"
     
Notes:
  • Width/length tolerances: +.250"/-.000"
  • All cast nylon plate products are sold with an 'as cast' finish.
     

 

 

 

  Stock Size Tolerance Lengths
Standard hex and square rod sizes:
0.250" to 0.625" 1/16" increments
0.625" to 1.250" 1/8" increments
0.250" to 1.250" +.000"/-.005" across flats 4ft, 8ft., 10ft.
     
 

 

 

 

Stock Size Tolerance Lengths Thickness/Width Tolerance
0.25" to 4.0" 1" to 6" 4ft., 8ft. +.025"/-.000"
       
Notes:
  • Rectangular bar is custom cut to the customer's requirements.